baugleichheitsbescheinigung statement of type-equality

BAUGLEICHHEITSBESCHEINIGUNG
STATEMENT OF TYPE-EQUALITY
Hiermit wird bestätigt, dass
With this is confirmed, that
Pinnacle SoundBridge Radio
Tatung SoundBridge R1000
baugleiche Produkte sind und sich somit auf dieselben Prüfberichte beziehen.
are type equal products and that they refer to the same EMI test reports.
Braunschweig, 28. April 2006
Braunschweig, April 28th, 2006
Pinnacle Systems GmbH
.........................................
.................................................
Dr. Alexander Roy
Jörg Tewes
Director Hardware Engineering
VP Engineering
(Rechtsverbindliche Unterschrift / Legally Binding)
Konformitätserklärung nach ISO/IEC 17050-1
Declaration of conformity in accordance with
ISO/IEC 17050-1
Nr. / No 1.00
Anbieter / Supplier :
Pinnacle Systems GmbH
Anschrift / Address :
Frankfurter Strasse 3c, 38122 Braunschweig, Germany
Produkt / Product :
SOUNDBRIDGE RADIO
Das oben beschriebene Produkt ist konform mit: / The product described above is in conformity with:
EN 301489-1 : 2002
Elektromagnetische Verträglichkeit und Funkspektrumangelegenheiten (ERM) - Elektromagnetische
Verträglichkeit für Funkeinrichtungen und -dienste - Teil 1 : Gemeinsame technische Anforderungen (V1.4.1)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services - Part 1: common technical requirements (V1.4.1)
EN 301489-17 : 2002
Elektromagnetische Verträglichkeit Funkspektrumangelegenheiten (ERM) - Norm über die
elektromagnetische Verträglichkeit (EMV) für Funkgeräte- und -dienste - Teil 17 : Spezifische Bedingungenfür
2,4 GHz-Breitdübermittlungssysteme und 5 GHz-Hochleistungs-RLAN-Einrichtungen.
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services - Part 17: Specific conditions for 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN equipment
EN 55022 : 1998 +
A1:2000 + A2:2003
Class B
Grenzwerte und Messverfahren für Funkentstörungen von Einrichtungen der Informationstechnik
Limits and methods of measurement of radio interference characteristics of information technology equipment
-- CONDUCTED EMISSION TEST --
EN 61000-4-2 : 1995 + Störfestigkeit gegen Entladung statischer Elektrizität
A2:2001
Electrostatic discharge immunity test
EN 61000-4-3 : 2002
Störfestigkeit gegen hochfrequente elektromagnetische Felder
Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 : 1995 + Störfestigkeit gegen schnelle transiente elektrische Störgrößen/BURST
A2:2001
Electrical fast transient/burst immunity test
EN 61000-4-5 : 1995 + Störfestigkeit gegen Stoßspannungen/SURGE
A1:2001
Surge immunity test
EN 61000-4-6 : 1996 + Störfestigkeit gegen leitungsgeführte Störgrößen, induziert durch hochfrequente Felder
A1:2001
Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-11 : 2001
Störfestigkeit gegen Spannungseinbrüche, Kurzzeitunterbrechungen und Spannungsschwankungen
Voltage dips, short interruptions and voltage variations immunity tests
EN 61000-3-2 : 2000
Grenzwerte für Oberschwingungsströme
Limitations for harmonic currents
EN 61000-3-3 : 1995 + Grenzwerte für Spannungsschwankungen und Flicker
A1:2001
Limitations of voltage fluctuations and flicker
EN 300328 : 2004
Elektromagnetische Verträglichkeit und Funkspektrumangelegenheiten ERM) - Breitbandübertragungssysteme -Datenübertragungsgeräte, die im 2,4-GHz-ISM-Band arbeiten und BandspreizModulationstechniken verwenden - Harmonisierte EN, die wesentliche Anforderungen nach Artikel 3.2 der
R&TTE-Richtlinie enthält (V1.6.1).
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Wideband transmission systems - Data
transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
EN 60950 : 2001
Sicherheit von Einrichtungen der Informationstechnik
Safety of information technology equipment
Dieser Erklärung liegt zugrunde: Prüfbericht(e) des EMV-Prüflabors
This certification is based on: Test report(s) generated by EMI-test laboratory
Braunschweig, 28. April 2006 / April 28th, 2006
.........................................
.................................................
Dr. Alexander Roy
Jörg Tewes
Director Hardware Engineering
VP Engineering
(Rechtsverbindliche Unterschrift / Legally Binding)
FCC Compliance Statement
FOR YOUR OWN SAFETY
NOTE: Shielded cables should be used for a composite interface. This is to ensure
continued protection against radio frequency interference.
FCC WARNING STATEMENT
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
ƒ
Reorient or relocate the receiving antenna.
ƒ
Increase the separation between the equipment and receiver.
ƒ
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
ƒ
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Shielded interface cable must be used in order to comply with the emission limits.
LABEL WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Pinnacle Systems
Pinnacle SoundBridge Radio
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE