Dinâmica Engenharia

Transcrição

Dinâmica Engenharia

Automatic machines for ladder
and stepladder production
We provide solutions for:
Bending / Driling / Punching / Riveting / Assembly
Small Stepladder
Aluminium Stepladder
Extension Ladder
Ladder
Folding ladder
Dinâmica – Engenharia, Lda - Rua da Madeira 270/B 3700 - 176 São João da Madeira - [email protected] - www.dinamica-virtual.pt
Advanced machines and tools
for the production of ladders and stepladders
Major Benefits
- Reduction of cycle time
- Improved productivity
- Better product quality
- Optimization of production flow
- Resource Efficiency
All machines can be customized for your needs
Ladder machines
LPM-S
AMT
LPM
FCT
EMA
LPM - Automatic machine for
producing a ladder
Features:
- Stiles traction system
- Stiles punching
- Rung insertion
- Rung expansion
- Rung orbital riveting
- Crimping pads
Characteristics:
- Cycle time: Approximately 20 seconds / meter
- Section (mm): 60x20x1.2 up to 90x30x1.5
- Profile length (mm): 1000 up to 6000
- Profile section: to be defined by the client
LPM-S – Semi-Automatic machine for
producing a ladder
Features:
- Integrated solution for ladder production
- Conveyor for ladder pre-assembly
- Rung expanding
- Rung orbital riveting
- Automatic ladder advance
- Conveyor for ladder exit
Characteristics:
- Working cycle time 7 seconds per rung
- Profile length (mm): 1000 up to 6000
EMA - Semi-Automatic expansion machine
for aluminium profile
Features:
- Double expansion head
- Expansion head with automatic lubrication
- Processing of parallel ladders
- Small setup time
Characteristics:
- Cycle time: 4 seconds for rung
- Profile section: :
□ /○/D
AMT – Semi automatic machine for
hinges assembly
Features:
- Simultaneous mounting of tree hinges
- Faster production cycle
- Product length adjustment
Characteristics:
- Cycle time: 5 seconds
- Production of 1100 parts in 8 hours shift
- Operated by a manual valve
- Dimensions (mm): 1800x700x900
FCT - Portable tool for crimping pads
Features:
- Lightweight
- Ergonomic
- Faster production cycle
- Adaptable to various pad types and materials
Characteristics:
- Application of 8000 operations in 8 hours shift
- Operated by pneumatic manual valve
Stepladder machines
RCT
MPE-S
SRM
MPE
RMA
BME
MDR
MFA
MFA - Automatic machine for
producing a stepladder front profile
Features:
- Profile automatic centering
- Drilling
- Slot opening
- Punching
- Bending
Characteristics:
- Profile lenght (mm): 2300 up to 5500
- Bending width adjustable
MPE – Semi-automatic machine for
producing a stepladder rear profile
Features:
- Simultaneous production of two profiles
- Drilling
- Bending
- Deforming
- Punching
Characteristics:
- Cycle time: 15 seconds (2 parts, left and right)
- Automatic clamping of aluminum profiles
- Profile section : to be defined by the client
- Maximum profile length (mm): 2000
MPE-S - Automatic machine for
producing a stepladder rear profile
Features:
- Manual feeding
- Drilling
- Bending
- Deforming
- Manual extraction
Characteristics:
- Cycle time: 15 seconds (1 part)
SRM – Semi automatic machine for
steps production
Features:
- Automatic stopper
- Cut for 2 rungs simultaneously
- Holes Punching
- Disc saw cutting
- Adjustable for different length
Characteristics:
- Cycle time: 5 sec per rung
MDR – Automatic machine for tube
diameter reduction
Features:
- Automatic feeding
- Automatic extraction
- Diameter size reduction both extremities
- Adjustable for different lengths
Characteristics:
- Cycle time: : 5 sec/Part
- Profile section: Round
RMA - Semi-Automatic riveting machine
for aluminium profile
Features:
- Double riveting of profile
- Riveting head for different shapes of rung
- Automatic adjustment to next dimension
- Ladder and stepladder with adjustment
Characteristics:
- Cycle time: 5 second for rung
- Type of rungs:
□ /○/D
RCT - Semi-Automatic machine for
riveting clamps
Features:
- Up to 6 simultaneous riveting
- Various types of rivet
- Product width adjustment
- Flexibility
- Automatic clamping of front profile
Characteristics:
- Cycle time: 5 seconds for clamp
- Operated by a manual valve
BME – Stepladder assembly workbench
Features:
- Ergonomic assembly workbench
- Pneumatically operated arm to open and close the front profile
- Stepladders up to 8 steps
- Adjust the height between steps
Characteristics:
- Customizable to client step ladder model
- Working pressure: 6 bar
- Dimensions: 2700 x 1300 x 2200 mm
Hydraulic Press machines
PH30
PHF
PH30 - Hydraulic press for tools
Features:
- Electric board with command buttons.
- Operation through bi-manual command.
- Table press with system for easy attachment tool.
- Press base table with tool clamping system
- Closed press with frontal area protected by ligth curtain
- With a 2 working speed the hydraulic cylinder approaches in
fast mode at low pressure and at low speed and high pressure
when executing the operation.
Characteristics:
- Area: Up to 650x500 mm
- Force: 10 000 Kg / 20 000 kg / 30 000 Kg
- Power: Up to 7.5 KW
- Voltage: 400V / 50Hz or 220 V / 60 Hz
PHF - Hydraulic press for tools
Features:
- 2 hydraulic presses operated by common hydraulic unit
- Actuated with foot switch (hands free to part manipulation)
- Tool developed for the part to be processed
Characteristics:
- Cycle time: 3 sec/stroke
- Profile section: Customizable
- Dimensions: 1200 x 600 x 1500 (mm)
Test Equipment
DTE
LTE
DTE – Durability test equipment
EN131
Features:
- Pneumatically actuated and electronically controlled
- Programmable for different cycles of operation
- Human machine interface (HMI) integrated
- Accordingly to required testing from EN131
NBR13430
Characteristics:
- Adaptable to various types of standing ladders
- Pneumatic pressure: 6 bar
- Dimensions: 1500 x 1700 x 2800 (mm)
LTE – Load test equipment
Features:
- Hydraulically actuated and electronically controlled
- Programmable for different cycles of operation
- Human machine interface (HMI) integrated
- Load cell with capacity up to 300 kg
- Linear encoder to deflection measure up to 700mm
Characteristics:
- Hydraulic pressure: 160 bar
- Power: 0.55 kW
- Voltage: 400 V, 3 Phase, 50Hz / 60Hz
- Dimensions: 2500 x 750 x 800 (mm)
Special machines
Auto riveting / screwing
Assembly cell
Scaffolding pilar
Tools
About us
Dinâmica - Engenharia is a leader supplier of special
machines and tools for the metalworking and automotive
industry.
We specialize in the project development, prototypes and
special machinery for industrial process optimization.
Dinâmica Engenharia, Lda
Rua da Madeira 270/B
3700 - 176 São João da Madeira
Tel: +351 256 001 915
Email: [email protected]
Web: www.dinamica-virtual.pt

Dinâmica Engenharia

Transcrição

Documentos relacionados

2003 Boys Team Qualifying Order: 1. Cedar Crest 2. Governor Mifflin

EMA - Semi-Automatic expansion machine for

2000 - Beryllium copper fingerstrips overview

Spare parts lis