docE5CSV-R1T-F AC100-240 - Omron
download 
Denúncia Documentos relacionados
Shock resistance
E5CK-AA1 - 110 TO 240VAC - OMRON - Datasheet PDF
Set: the communications conditions; transfer: output and event input parameters to match the type of Option Board
installed in the Controller. This mode will be accessible only when an option board...
Host Connection Manual - OMRON
8. Use a twisted-pair cable with a cross-sectional area of at least 2 mm to connect to the
power terminals and always use M3.5 crimp terminals. Tighten the terminal screws to a
torque of 0.8 N×m. M...
Dieu khien nhiet do Omron dong E5EK - catalog
change rate limiter, input digital filter, input shift, run/stop, protect functions
Option
Multiple SP, run/stop selection, transfer output functions
Solid-state Timer H3BA-N - 5110
Example: To set a range of 10 and 20 s.
Mount the Panel Cover on the Timer, set the time setting knob to 10 s
(the lower limit of the setting range), and place Time Setting Ring C
onto the time set...
Manual de Instalação IHM Série NV
to a torque of between 0.22 and 0.30 N·m. Make sure the screws are properly tightened.
9. To prevent malfunctions caused by noise, ground the PT correctly.
10. Do not touch the surface of the circu...
Shock resistance
H7CX-_-N Multifunction Counter/Tachometer Datasheet
• Front Panel can be changed to white or light gray.*3
• Models with two independent tachometer inputs have been added to the series.
*1.For 100 to 240-VAC Models with Screw Terminals: 78 mm, Model...
