Interconnection Box Type T – CXIT

Interconnection Box Type T – CXIT (Line MCDPR)
PRODUCT: CXIT-E-MCDPR-C0-K2
TECHNICAL SHEET 1/2
Customer Service: 55 11 3019-1616
See the Installation Manual for further details
• DESCRIPTION
The interconnection and passage box type T, CXIT-E, permits the interconnection of power supply cables and
communication from the FCCM-E equipment (communication power source and converter) with the SLPR-E (data
supervisor), as well as the interconnection of this SLPR-E with others in the same power supply and communication
line.
• CXIT-E TECHNICAL DATA
Interconnection terminal bars for power supply cables, communication, and ground.
Switch for the selection of the SLPR-E interconnection with the next data supervisor or other supervisor extension.
Protection against short-circuit or overcurrent, by fuse.
Supplied with a pass-through rubber at the cable inlet and outlet, as well as prepared for adaptation and use of cable
glands (optional).
Protection degree: IP50.
Attachment: case bottom (internal)
Facilitates the installation of the MCDPR system, and can be performed by the user him/herself.
For more information see the Installation Manual in our site.
• Dimensional Drawing (mm)
PRODUCT :
114
106
R
SELCON LTDA.
Site :
Indústria Brasileira
PRODUCTION DATA SUPERVISOR SYSTEM
E052
62.5
114
• ORDER CODE - CXIT-E-MCDPR-C0-K2
SELCON SISTEMAS ELETRÔNICOS DE CONTROLE LTDA.
CNPJ 56.935.877/0001-29
R. Américo Samarone, 502 • CEP 04284-000 • Moinho Velho •
São Paulo • SP • Phone/Fax: (55 11) 3019-1616
SELCON
Automação Industrial
http://www.selcon.com.br
Selcon Ltda., reserves the right to change this data
sheet whenever needed – June 2007
Dealer or Distributor:
1/2
Interconnection Box Type T – CXIT (Line MCDPR)
PRODUCT: CXIT-E-MCDPR-C0-K2
Customer Service: 55 11 3019-1616
TECHNICAL SHEET 2/2
See the Installation Manual for further details
• OTHER PRODUCTS AND ACCESSORIES:
⇒ Production Data Supervisor – SLPR-E-MCDPR
⇒ Interconnection box – CXIT-E-MCDPR
⇒
⇒
⇒
⇒
⇒
⇒
Communication power source and converter – FCCM-E-MCDPR
SLPR equipment manager software – SOFT-GER-MCDPR
Customized application software for the client – SOFT-APL-MCDPR (upon request)
Bar code reader – ACS-LCB-MCDPR
Installation, supervision, and start up, and other services
FLAME SAFETY LINE
SELCON SISTEMAS ELETRÔNICOS DE CONTROLE LTDA.
CNPJ 56.935.877/0001-29
R. Américo Samarone, 502 • CEP 04284-000 • Moinho Velho •
São Paulo • SP • Phone/Fax: (55 11) 3019-1616
SELCON
Automação Industrial
http://www.selcon.com.br
Selcon Ltda., reserves the right to change this data
sheet whenever needed – June 2007
Dealer or Distributor:
2/2