docIntimidator Spot LED 250 Quick Reference Guide Rev. 10 Multi
download 
Denúncia Documentos relacionados
Intimidator Scan LED 100 Quick Reference Guide, Rev. 1
• Replace the fuse with the same type and rating.
• ONLY use the hanging/mounting bracket or the handles to carry this
product.
• The maximum ambient temperature is 104° F (40° C). Do not operate t...
Intimidator Spot 155 Quick Reference Guide Rev. 1 Multi
The voltage of the outlet to which you are connecting this product must
be within the range stated on the decal or rear panel of the product.
· This product is for indoor use only! (IP20) To preven...
Intimidator Spot 100 IRC Quick Reference Guide
· Replace the fuse with another of the same type and rating.
· ONLY use the hanging/mounting bracket to carry this product.
· The maximum ambient temperature is 104° F (40° C). Do not operate
this ...
Intimidator Spot 255 IRC Quick Reference Guide Rev. 2
mounting this product, read the Safety Notes. Make sure the
mounting clamp is capable of supporting the weight of the product. For our
Chauvet line of mounting clamps, go to www.chauvetlighting.com...
Intimidator Scan 300 Quick Reference Guide, Rev. 1 Multi
least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with the ...
EN