docOperating and Maintenance Instructions Instrucciones de
download 
Denúncia Documentos relacionados
www.haskel.com Technical Specifications and Performance Data
However, 40 psi is the recommended minimum for long term reliable operation. The maximum air-drive
pressure is 125 psi (8.5 bar). It is not necessary or desirable to use an airline lubricator. The ...
www.haskel.com Technical Specifications and Performance Data
The air drive requires a minimum pressure of 25 psi to actuate the air cycling valve spool*. The maximum
air drive pressure is 125 psi. It is not necessary or desirable to use an airline lubricator...
www.haskel.com Technical Specifications and Performance Data
It is not necessary or desirable to use an airline lubricator. The air drive section of all Haskel liquid pumps
are pre-lubricated at the time of assembly with Haskel special lubrication P/N 50866....
Operating and Maintenance Instructions Instrucciones de
pump section to outlet to equalize before start up.
Starting the Amplifier - (per schematic figure 1)
1. Speed control valve should be closed. (Handle at 90° to valve.)
2. Allow inlet air or nitrog...
Operating and Maintenance Instructions Instrucciones de
11. Reassemble pump in reverse order of disassembly instructions. Care must be taken in
disassembly and assembly that the flow and pilot tube o-rings be on the flow and pilot tubes prior
to assembl...
Operating and Maintenance Instructions Instrucciones de
The ratio of the air drive piston vs. the pump air piston is 2:1. A model AAD-2 will create an output
pressure of 2 times the regulated drive air pressure, plus the unregulated inlet air pressure, ...
