OIL-HYDRAULIC BENT PUMP AXIAL PISTONS

OIL-HYDRAULIC BENT PUMP
AXIAL PISTONS
Main Dimensions
Ref. BI M
Fixation flange according
to ISO 7653
(Dimensions in mm)
B8x32x36 (DIN 5462)
CTI BI M 1311- 3
Main Data
Pumps BI
Displacement (cm3/rot.)
Operating pressure (bar) (up to)
Peak pressure (bar)
Operating rotation1 (rpm)
Max. rotation without load1 (rpm)
Weight (approx.) (kg)
Pistons quantity
A-Oil outlet (DIN ISO 228)
B-Oil inlet (DIN ISO 228)
C
25M
30M
40M
50M
26
350
400
2500
2800
9.5
32
350
400
2500
2800
9.7
42
350
400
2300
2600
9.9
50
350
400
2100
2400
10.0
3/4’’BSP
1’’BSP
5
3/4’’BSP
3/4’’BSP
1’’BSP
1’’BSP
Drain hole
3/4’’BSP
1’’BSP
How to order:
3
Example: Pump 50cm /rot; operating pressure up to 350 bar; peak pressure 400 bar, ref. BI M  BI50M
Fluids
Recommended viscosity range
Limits viscosity range
Start-up viscosity range, without load
Filtration
Inlet pressure range
mineral oils type ISO HM or DIN 51524-2 HLP
20 to 40 cSt (mm2/s) at working temperature
10 to 750 cSt (mm2/s)
750 to 1500 cSt (mm2/s)
10μm ISO4406 18/13
0,8 to 2 bar abs
In the application of any of these pumps; the use of these data does not exempt the reading of the instruction ‘’BI pumps recommendations before start-up’’
1
These values are valid at an absolute pressure of 1 bar in suction port when operating with a mineral oil at a viscosity of 30 mm 2/s (cSt).
ABER is constantly engaged in improving its products and, therefore, reserves itself the right to modify without any further notice the characteristics shown
ABER - Embraiagens e Comandos Hidráulicos - A. B. LDA
Rua Francisco de Almeida, Nº 30 – Vila Nova da Telha – 4470 MAIA - Portugal
Telefone: +351.22.9438070 Fax: +351.22.9420823 e-mail: [email protected] http://www.aber.pt
1/ 2
OIL-HYDRAULIC BENT PUMP
AXIAL PISTONS
Diagram
Flow - Speed
Ref. BI M
Flow (l/min)
Diagram
Input Power - Flow – Pressure
Speed (rpm)
Power (cv)
Hose dimensions
Inlet Hose
Flow (l/min)
Outlet Hose
Flow (l/min)
30
40
50
60
70
80
90
100
110
Internal pipe diameter (inch)
1/2"
5/8"
5/8"
3/4"
1"
1"
1"
1"
1"
50-100
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
1"
1"
1"
100-150
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
1"
1"
1"
150-200
P (bar)
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
1"
1"
200-300
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"
3/4"
1"
300-350
CTI BI M 1311- 3
30-40
50-60
70-90
100-120
Internal pipe
diameter (inch)
1"1/4
1"1/2
1"3/4
2"
Important notes:
-To install one of these pumps, please consult and respect the instruction “BI pumps recommendations
before start-up”;
- Other axis available, please consult “Axel options”.
ABER is constantly engaged in improving its products and, therefore, reserves itself the right to modify without any further notice the characteristics shown
ABER - Embraiagens e Comandos Hidráulicos - A. B. LDA
Rua Francisco de Almeida, Nº 30 – Vila Nova da Telha – 4470 MAIA - Portugal
Telefone: +351.22.9438070 Fax: +351.22.9420823 e-mail: [email protected] http://www.aber.pt
2/ 2