Catálogo - Portrisa

Security
DOORS
04 Structure
05 Euro / Matrix
06 Triel
07 Hi-tech
10 Power
11 Ballistic
12 Side window
02
13 Double Door
14 Security Details
16 Push
18 Luxdoor
22 Finishings
26 Technical Drawings
33 Certifications
THE SECURITY DOOR
Portrisa’s high Security doors have an electro zincked steel
body, with double steel sheet on the outside, also with vertical
omegas, making a solid constructed structure.
To ensure more and better security, the doors structure is
strengthened even more on the areas surronding the lock,
hinges and bolts.
Adjustable hinges made of steel and automatic mobile sill
with adjustment screw to prevent air, light and dust
penetration. Each one of our doors is supplied with a job key,
that will be replaced by unique final key once the installation
is completed.
03
STRUCTURE
COMPOSITION • Security Door
The door structure is made from
electro zincked steel sheet of 1mm
thickness forming vertical
reeinforcements (omegas) welded by
points (RSW). The end product is a
steel reeinforced barrier with a total of
64mm thickness, designed to resist to
the most advanced techniques of
intrusion. Besides their quality,
doors aesthetics and style were not
compromised.
1
2
2
2
3
4
5
6
7
SUB-FRAME
Built with 2mm electro zinc plated
steel, it stays firmly fastened to
the concrete wall with 8 powerful
antisliding steel ties. This sub-frame
is equipped with special fasteners
allowing vertical and horizontal fitting
adjustment, as well as easy assembly
of the frame and door. This makes
all the door installation extremely
easy, the door can be applied to the
sub-frame afterwards, this procedure
is easy and free from hassle, it can
save your door panels from getting
damaged during house finishing job..
8
9
START SERIES
The START door is built with an
exterior layer of steel reinforced by 3
sheared internal omegas meant to
bestow door’s toughness.
Start series have 12 fastening points:
• 4 deadbolts +1 latch lock
• 1 top leading edge deadbolt
• 1 bottom leading edge deadbolt
• 4 hinge side bolts
• 1 safety catch
• 1 limitador de abertura
MAX SERIES
The MAX door is buit with an exterior
layer of steel reinforced by 3
sheared internal omegas meant to
bestow door’s toughness.
Max Series have a total of 14
fastening points:
• 4 deadbolts +1 latch lock
• 2 top leading edge deadbolt
• 2 bottom leading edge deadbolt
• 4 hinge bolts
• 1 safety catch
04
1
2
3
4
5
6
7
8
9
Frame and sub-frame
Vertical reinforcement omegas
Adjustable hinges
Leading edge bolts
Electro zincked steel structure
Great-angular spyhole
Safety catch
High security lock
Finishing panel
MODELS
EURO
The high SECURITY PORTRISA door EURO model
comes standard with a smooth turning european
cylinder system lock, armoured with steel plate, the
cylinder is shielded by a protection manganese steel
defender system. The lock comes along with the keys,
which are small and very easy to handle. You can have
multiple cylinders with only 1 master key. The door is
provided with temporary key while the installation is taking
place, this temporary key will be replaced by 5 fresh new
ones afterwards.
>Keyhole defender
made with hardened
manganese steel
Euro-Profile Cylinder Lock
Employees
keys
[Optional]
MATRIX
The high SECURITY PORTRISA door MATRIX model
has an easy and quiet double bit lock with easy
combination swap. The lock is armoured with steel plate.
Temporary key for door installation is supplied, once
the door is installed, 5 new keys are delivered.
>Easy key compbination swap
Double Bit Lock
05
TRIEL
The high SECURITY Portrisa door TRIEL model is provided
with a smooth turning european cylinder, is shielded by a
defender protection manganese steel system. This lock can
be operated electronically and comes along with the key,
which is small and very easy to handle. You can have multiple
cylinders with only 1 master key. The door is provided with
temporary keys while installation is taking place; the keys will
be replaced by 5 new ones once the instalation is completed.
Triel Lock
06
HI-TECH
The High SECURITY PORTRISA DOOR HI-TECH model is
equipped with an electronic lock with a motor-driven bolt
closing mechanism and a built-in digital control for easy
operation. It offers top noch security and reliability.
An European profile cylinder (with traditional keys included
to use in case of emergency), shielded by manganese steel
defender, which is drill proof. The HI-TECH model is supplied
with 3 electronic keys (transponders) that will activate
the lock by proximity.
Available colours:
Chrome / Brass
Electronic Keys
OPTION 1
OPTION 2
Digital Fingerprint
scanner [Option]
Digicode [Option]
The finger scanner
can record up to 99
digital fingerprints,
providing a
personalized access.
The digicode allows
the opening by a
personal code up to 8
digits.
07
08
09
POWER
The high Security Portrisa door POWER model is suited for new
and refurbished apartments sector where both fire and
anti-burglar performances are required. With double steel sheet
on the outside also with vertical reinforcements, making a unitary
construction with high-density rock-wool insulating inner layer
and intumescent seal on the frame, enabling this security door
to resist fire, to have accoustic and thermal insulations and to
be burglar proof according to the European norms. The frame is
made with 1,5mm thick steel plate.
Included features:
• Adjustable mobile cill;
• Safety catch, attached to the frame and enabled by button from interior;
• HOPPE design handles and furniture;
• Interior lever handle;
• Exterior knob;
• Latch adjuster (anti card);
• Fireproof - EI230;
• Fireproof - EI260.
10
BALLISTIC
The high SECURITY door, ballistic models MAGNUM and NATO from PORTRISA,
have on their core a bullet proof panel made of para-aramid military grade fiber
(Kevlar). This bullet proof panel, together with the reinforced structure, make a
ballistic armour perfect for situations where there is a potencial threat of fire
arms use, for exemple: bank agencies, currency exchange bureaus, pawn shops,
gold and jewlery shops, panic rooms, etc.
The door has a casual appearance with this type of covert ballistic protection,
therefore, it can take by surprise any potential attackers, who will be unprepared
against this door. Distinct ballitic levels can be provided depending of the requisites:
MAGNUM BALLISTIC DOOR
NATO BALLISTIC DOOR
Tested and certified EN1522 level FB4 (NIJ III-A) and
FSG. This level includes all main handguns and also
the shotgun:
9 mm Glock 19
.357 Desert Eagle
.44 Smith & Wesson
12 gauge Beretta
Tested and certified EN1522 level FB6 (NIJ III).
This level includes the military calibres, 7.62
mm e 5.56 mm for assault rifles:
AK47 Kalashnikov
AR15/M16/M80
Kevlar ballistic panel
Reinforced structure.
Ultra-resistent fibre, used by the police
and military on their bullet proof vests.
Is made by multiple layers of paraaramid
fibre and has a mechanical resistance
5x superior to steel.
In addition to the ballistic
layer, the door structure was
further reinforced and the
number of locking points
was increased to withstand
this type of attacks.
11
FIXO
The high SECURITY PORTRISA FIXO model can be produced with one of four lock types (Euro, Hi-Tech,
Matrix or Triel). The side panel and fanlight are prepared to have 12mm multi-laminated glass panel.
The glass is fastened to the frame with a simple trim.
1. Fanlight
2. Side window
3. Double side
window
12
DOUBLE LEAF
High SECURITY Door with two leaves, can be
manufactured with different locking system, this front
door has a great visual impact to your front entrance,
giving your house a beautiful, imposing and secure
entrance, matching the style of your home.
Top bolt adjuster
Located on the frame,
allows adjusting of the
passive leaf locking
position, this provides
further weathertightness
to the doorset.
Passive leaf
unlocking
system.
The passive leaf lock
can be released on
top and bottom with
a single “push-rotate”
button which is easy
to operate and safe..
13
SAFETY DETAILS
Anti break-in bolts
4 Steel hinge bolts with
15mm diameter that are
placed on the hinged side of
the door. The door stays
anchored and safely fastened.
They provide true obstacle
against crowbar and spanner
force.
Security Hinges
The hinges allow door height
adjustment. Its axle features a
spherical bearing which allows
a smoother movement of the
door.
14
Great-angular spyhole
Safety catch
Top and bottom deadbolts
Two colours available, Silver
and Brass, has a big viewing
angle of 180º.
Optionally we can add a 2nd
spyhole according to the
handicapped norms (PMR)
Integrated in the door,
allows a small gap for
interaction with the outside
by easy the turning of a
knob.
Security deadbolts placed
on top and bottom of door’s
leading edge. Driven by the
lock itself, this bolts are made
with nickeled solid steel rods.
They hold the door tight
fastened to the wall.
Lock
Adjustable latch seat safety
Automatic drop-down cill
The high security lock runs
smoothly and has a latch and
four deadbolts made of
zincked steel with 18mm
diameter is protected by an
anti-drilling plate.
The latch safety is an antiburglar
system placed on the latch seat to
avoid the picking and tampering of
the latch using ATM card or X-Ray
sheet and allows the adjustmet of
the door closing strength.
Placed at the bottom of the door,
this mobile cill is adjustable,
providing against light, air,
water and dust penetrations. It
eliminates the gap between the
door and the floor and brings
acoustic attenuation.
Concealed hing (option)
Anti-drill defender
Double rubber seal
Hinge concealed inside the
frame, adapted for the security
door it can bear heavy doors
and provides an outstanding
aesthetics.
(for euro profile cylinder).
Manganese steel block of high
hardness and high resistance
to piercing and drilling, protects
the cylinder against perforation
tool attacks to the cylinder from
outside.
One from the leaf side and the
second from the frame side
(picture), provide the complete
thermal and acustic insulation to
the doorset.
They warrant a hermetic barrier to
the air, water and wind passage.
15
PUSH
The high SECURITY PORTRISA door PUSH model, opens
towards the outside and has high security lock.
From the inside it can be operated with anti-panic lever.
Provided with smooth Euro cylinder system lock,
armoured with steel plate. The lock is shielded by a
defender protection manganese steel system.
Anti-panic bar PUSH model
Note
We produce this model only
with full trim edges
16
17
LUXDOOR
Luxdoor is a pivot system door, with an
outstanding appearance, developed to
meet even the boldest architecture
project. A feat of modern design, it’ s an
icon of innovation, character and refined
taste.
• This door is suited to big wall openings,
matching the facade of your household
exquisitely.
• It has a vertical pivot system which is
adjustable
in 3D.
• The door is made of an electro zincked
steel structure combined with an outer steel
plate. It’s reinforced by 5 vertical omegas,
combined together to form a solid whole.
18
• To ensure a high level of security, the door
is strengthened with 13 locking points, 4 of
which are located on the pivot side and the
remaining 9 on the lock side.
• The frame and the leaf edges are made
out of blushed stainless steel.
• LUXDOOR is equipped with either
Euro or Matrix or Hi-tech lock.
• It has automatic drop down cills
installed, both on the bottom and on the
top of the door leaf, blocking the entrance
of dust, light, water and air daughts.
19
20
21
Inside lever handle
and escutcheon
Inside lever handle and
escutcheon Swarovski
(optional)
Tubular door
handle
(stainless steel)
POWDER COATED COLOURS
Can be flat with groove effects
without stainless steel kick plate.
Square door
handle
(stainless steel)
Door handle with imbued
panel (same colour as
outside panel)
POWDER COATED ALUMINIUM COLOURS
Can be flat with groove effects
and stainless steel kick plate
Grooves
Brushed
stainless
steel
PIVOT SIDE DEADBOLTS
22
LOCK
3D ADJUSTABLE PIVOT
COLOURS · Interior finishings
DECOR (melamine)
Wengue
Sucupira
Mahogani
Walnut
Natural Oak
Light Oak
Beech
CB Black
Bespoke RAL coating
(optional)
USA Cherry
DECOR texturized (opcional)
Silvestre Pine
PANELS STYLE
WITH GROOVES - Melaminic and fenolic panels
1FR
1F-2FR
1FC-6FR
RCS
8FR
77
16
RCP-5
Note: Imbuted stainless steel by request
PANELS WITH MOULDINGS - MDF Base panels
coated with melaminic paper imitating wood
PANTOGRAPH - painéis com Valcor base
3Q
D45
D80
701
600
16
3Q
D45
600 SP 23
PANEL STYLE
PANELS WITH MOULDINGS - MDF Base panels
coated with melaminic paper imitating wood
PANTOGRAPH - painéis com Valcor base
3Q
D45
D80
701
600
3Q
16
D45
COLOURS · Exterior Finishings
FENOLICS
Beech
Oak
Light Oak
Walnut
Loft Brown
Mahogany
Dark Mahogany
Striped Grey
Loft Grey
Country Wood
Wengue
Pacific Board
Nordic Black
Grey (± RAL 7015)
Bespoke RAL
(optional)
PLYWOOD
Oak
24
Mahogany
Walnut
Wengue
600 SP
ACCESSORIES
Standard Brass
furniture
Standard Chrome
furniture
Square furniture (Option)
Tubular handle
(Option)
Note
2 sizes available:
400mm / Ø 25mm
1000mm / Ø 35mm
Stainless steel
Aluminium threshold
and weather bar set (Option)
Aluminium threshold
Fixed aluminium cill.
Fixed on the floor, completely seals the
water, air and wind passage.
(Option)
Wood trim edge finish
Frames and edges
Oak
Beech
Brown
± RAL 8017
Security window( (Option)
Steel trim edge finishing
Opaque double laminated glass with
air chamber, powder coated
aluminium or stainless steel beadings,
allows the passage of light without
compromising the level of security.
Hinge covers
Grey
± RAL 9007
White
± RAL 9003
Stainless
steel
Grey
Beech
Oak
Golden
White
(option)
Note: Beech and Oak finishes cannot be used on the door RP model
25
INSTALLATION
DRAWINGS
01
Installation with
Plaster Finishings
Plaster / Stucco
Wall
Silicone joint
(if necessary)
Frame
Sub-frame
Steel anchor
1
2
3
4
5
6
02
Installation with
Marble
finishing
Marble
Wall
Silicone Joint
(if necessary)
Frame
Sub-frame
Steel anchor
1
2
3
4
5
6
03
Installation with
Wood finishing
Finishing
Filling
Wall
Silicone joint
(if necessary)
Frame
Sub-frame
Steel anchor
26
1
2
3
4
5
6
7
Lado interno
SCHÉMA TECHNIQUE
Cadre Standard
A
Free Passage
STANDARD
FRAME DRAWINGS
Wall opening
Free Passage
Free Passage
Wall opening
Dessin Technique
Wall opening
PORTE DE SÉCURITÉ
Dessin Technique
TECHNICAL DRAWING • Standard Frame
START POWER
SCHÉMA TECHNIQUE
Cadre Standard
PORTE DE SÉCURITÉ
START POWER
A
SCHÉMA TECHNIQUE
Détails Cadre Standard
e)
g)
DÉTAIL A
64
Free Passage
Wall opening
800 x 2000/2040/2100
920 x 2060/2100/2160
850 x 2000/2040/2100
970 x 2060/2100/2160
Standard Dimensions
920 x 2060/2100/2160
850 x 2000/2040/2100
970 x 2060/2100/2160
900 x 2000/2040 /2100 1020 x 2060/2100/2160
Height = 2400
Width = 1100
Maximum production dimensions
c)
900 x 2000/2040 /2100 1020 x 2060/2100/2160
Width = 1100
Height = 2400
Plasterboard (BA13)
Maximum production dimensions
Width = 1100
920 x 2060/2100/2160
Maximum
production dimensions
850 x 2000/2040/2100 970 x 2060/2100/2160
Wall opening
800 x 2000/2040/2100
Free Passage
Free Passage
800 x 2000/2040/2100
Wall opening
900 x 2000/2040
/2100 1020 x 2060/2100/2160
Free Passage
Wall opening
Standard Dimensions
Free Passage
f)
Standard Dimensions
Wall opening
Free Passage
Free Passage
Wall opening
d)
h)
b)
(Power model option)
Wooden finishing a)
Plasterboard (BA13) (Power model option)
Thermal insulation filling
Height = 2400
(Porta Wooden
model option)
finishing
insulation filling
Schéma Technique Thermal
- Porte Sécurité
(Porta model option)
Wall opening
Thermal insulation filling
920 x 2060/2100/2160
850 x 2000/2040/2100
970 x 2060/2100/2160
(Porta model option)
Schéma Technique - Porte Sécurité
900 x 2000/2040 /2100 1020 x 2060/2100/2160
A
Wall opening
Free Passage
800 x 2000/2040/2100
Portrisa, S.A. © 2015 - Tous droits réservés
Schéma Technique - Porte Sécurité
Free Passage
Plasterboard (BA13) (Power model option)
TECHNICAL
DRAWING
• Standard Frame details
Standard Dimensions
Wooden finishing
Portrisa, S.A. © 2015 - Tous droits réservés
48
Portrisa, S.A. © 2015 - Tous droits réservés
Maximum production dimensions
Height = 2400
48
Width = 1100
(Power model option)
64
Plasterboard (BA13)
Wooden finishing
(Porta model option)
Schéma Technique - Porte Sécurité
25
Thermal insulation filling
1.5
Portrisa, S.A. © 2015 - Tous droits réservés
18
40
a) Cadre
b) Pré-cadre
c) Pâte de scellement
d) Fixation du cadre au
pré-cadre
e) Vantail
27
B
Free passage
Easy installation frame, it doesn’t need the
Wall dimension
traditional sub-frame. This frame makes
the
installation work very easy due to the 11 adjustable
screws fixed directly to the wall. The
frame can be in Brown, White or bespoke
RAL.
Free passage
BF FRAME
DRAWING
Free passage
Wall dimension
Dessin Technique
Wall dimension
PORTE DE SÉCURITÉ
Dessin Technique
START POWER BF
TECHNICAL DETAILS • MIDDLE OF THE DOORWAY FRAME (BF)
SCHÉMA TECHNIQUE
Cadre Pose en Tunnel
PORTE DE SÉCURITÉ
B
START POWER
BF
SCHÉMA TECHNIQUE
Détails cadre pose en tunnel
f)
Free passage
Wall dimension
Wall dimensions
800 x 2000/2040/2100
920 x 2060/2100/2160
850 x 2000/2040/2100
970 x 2060/2100/2160
c)
d)
64
Free passage
850 x 2000/2040/2100
Standard Dimensions
Wall dimensions
920 x 2060/2100/2160
850 x 2000/2040/2100
970 x 2060/2100/2160
970 x 2060/2100/2160
Maximum
1020 x 2060/2100/2160
900 xproduction
2000/2040 /2100 dimensions
Free passage
Free passage
800 x 2000/2040/2100
Wall dimensions
1020 x 2060/2100/2160
900 x 2000/2040
920 x 2060/2100/2160
800 x /2100
2000/2040/2100
MaximumHeight
production
Width = 1100
= 2400 dimensions
Width = 1100
Wall dimension
Standard Dimensions
Height = 2400
900 x 2000/2040 /2100 1020 x 2060/2100/2160
Plasterboard (BA13)
Maximum production dimensions
Width = 1100
(Power model option)
Plasterboard (BA13)
Wooden finishing
(Power model option)
Wooden finishing
ThermalThermal
insulation
fillingfilling
insulation
Height = 2400
Wall dimension
((Power model
option)
((Power
model option)
Standard Dimensions
Plasterboard
(BA13)
model
option)detail
Free passage
Wall dimensions
TECHNICAL
DETAILS
• Middle
of the(Power
doorway
fixation
920 x 2060/2100/2160
Wooden finishing
800 x 2000/2040/2100
850 x 2000/2040/2100
970 x 2060/2100/2160
Thermal insulation filling
Free passage
Schéma- Technique
- Porte Sécurité
Schéma Technique
Porte Sécurité
Portrisa,S.A.
S.A.©
© 2015
2015 - -Tous
droits
réservés
Portrisa,
Tous
droits
réservés
900 x 2000/2040 /2100 1020 x 2060/2100/2160
((Power model option)
B
Maximum production dimensions
Schéma Technique - Porte Sécurité
Width = 1100
Height = 2400
Plasterboard (BA13)
38
Portrisa, S.A. © 2015 - Tous droits réservés
(Power model option)
50
Wooden finishing
Thermal insulation filling
((Power model option)
Portrisa, S.A. © 2015 - Tous droits réservés
25
Schéma Technique - Porte Sécurité
8
1.5
60
28
Plâtre (BA13)
Revêtement en bois
a) Cadre
b) Renfort cadre
c) Réglage (x11)
d) Vis pour béton (x11)
e) Vantail
f) Parclose
g) Caoutchouc
h) Omégas de renfort
Free passage
e)
Free passage
Standard Dimensions
Free passage h)
Wall dimension
b)
a)
Wall dimension
DÉTAIL C
g)
START POWER RP
Free passage
SCHÉMA TECHNIQUE
Cadre RP
C
Leaf dimension
Designed for a perfect and fast fit regardless
of the existing frame configuration (wood or
metal). Its smart adjustment allows the
correction of all defects done on the initial
installation.
RP FRAME
DRAWING
C
Free passage
Dessin Technique
Leaf dimension
Free passage
PORTE DE SÉCURITÉ
START POWER RP
Dessin Technique
TECHNICAL DETAIL • RP Frame
Leaf dimension
SCHÉMA TECHNIQUE
Cadre RP
PORTE DE SÉCURITÉ
Leaf dimension
Free passage: 2100x900
Leaf dimension:
2123x945d)
DÉTAIL B
i)
Plasterboard (BA13)
(Power model option))
Wooden finishing
e)
Thermal insulation filling
(Power model option)
c)
Schéma Technique - Porte
Sécurité (BA13) (Power model option))
Plasterboard
Portrisa, S.A. © 2015 - Tous droits réservés
f)
Maximum standard dimensions
Free passage: 2100x900
Leaf dimension: 2123x945
Wooden finishing
Thermal insulation filling
a)
(Power model option)
Extrapolation
Height: 1680mm / 2310mm
Width: 696mm / 957mm
Max. area: 22106,7 cm2
Portrisa, S.A. © 2015 - Tous droits réservés
TECHNICAL DETAIL • RP Frame detail
Leaf dimension
Free passage
Schéma Technique - Porte Sécurité
38
Plasterboard (BA13)
Leaf dimension
Extrapolation
Height: 1680mm / 2310mm
Width: 696mm / 957mm
Max. area: 22106,7 cm2
h)
Free passage
Maximum standard dimensions
Free passage: 2100x900
Leaf dimension: 2123x945
b)
64
Extrapolation
Height: 1680mm / 2310mm
Width: 696mm / 957mm
Max. area: 22106,7 cm2
Free passage
Free passage
g)
j)
Free passage
Extrapolation
Height: 1680mm / 2310mm
Width: 696mm / 957mm
Maximum
standard
Max. area:
22106,7
cm2 dimensions
Leaf dimension
SCHÉMA TECHNIQUE
Détails Cadre RP
Leaf dimension
Maximum standard dimensions
C
POWER
RP
Free START
passage:
2100x900
Leaf dimension: 2123x945
35
C
(Power model option))
Wooden finishing
Schéma Technique - Porte Sécurité
Portrisa, S.A. © 2015 - Tous droits réservés
(Power model option))
49
Plasterboard (BA13)
Schéma Technique - Porte Sécurité
Plâtre (BA13)
VO
VAR
Thermal insulation filling
(Power model option)
VAR
Wooden finishing
39
Thermal insulation filling
(Power model option)
1.5
Portrisa, S.A. © 2015 - Tous droits réservés
a) Cadre
b) Pré-cadre
c) Fixation
d) Fixation
e) Vantail
f) Cadre existant
g) Parclose
29
TECHNICAL
DRAWINGS
Fanlight and side windows
05
Installation with
Side Window
Sub-frame
Frame
Beading for
glass fixation
1
2
3
06
Installation with
Double sidewindow
Sub-frame
Frame
Beading for
glass fixation
1
2
3
07
Installation with
Fanlight
1
2
3
4
30
A=2000
A=2000
A=2000
A=2000
B=200
B=300
B=400
B=500
1
2
3
C=2360
C=2460
C=2560
C=2660
DOOR
Sub-frame
Frame
Glass fixation beading
2065 to 3000 x 1300
2020 to 2975 x 1010
194
2065 to 3000 x 1400
2020 to 2975 x 1110
194
2065 to 3000 x 1500
2020 to 2975 x 1110
294
2065 to 3000 x 1600
2020 to 2975 x 1210
294
2065 to 3000 x 1700
2020 to 2975 x 1310
294
2065 to 3000 x 1800
2020 to 2975 x 1310
394
TECHNICAL
DRAWINGS
2020 to 2975Pivot
x 1410
394
Luxdoor
Door
2065 to 3000 x 1900
2065 to 3000 x 2000
2020 to 2975 x 1510
394
TECHNICAL DRAWING • Example 2065x1200 (VO)
DIMENSION
(mm)
(WD)Wall dimension
(FP) Free Passage
(Min. H to Max. H x W)
(X)
Dimension
2065 to 3000 x 1100
2020 to 2955 x 810
194
2065 to 3000 x 1200
2020 to 2955 x 910
194
2065 to 3000 x 1300
2020 to 2955 x 1010
194
2065 to 3000 x 1400
2020 to 2955 x 1110
194
2065 to 3000 x 1500
2020 to 2955 x 1110
294
2065 to 3000 x 1600
2020 to 2955 x 1210
294
2065 to 3000 x 1700
2020 to 2955 x 1310
294
2065 to 3000 x 1800
2020 to 2955 x 1310
394
2065 to 3000 x 1900
2020 to 2955 x 1410
394
2065 to 3000 x 2000
WD2020 to 2955 x 1510 394
(Min. H to Max. H x W)
40
78
(WD) 2065
(FP) 2020 DIMENSION
LUXDOOR
PIVOT AXIS
ZERO LEVEL
FLOOR
FINISHING
NOTE On the order form,
consider the wall
opening dimension
85
The height
has 50mm
increments
40
CONCRETE
78
DIMENSÃO
(mm)
(VO) Vão-de-Obra
(PL) Passagem Livre
(Alt. Min. a Alt. Máx. x Larg.)
(X)
Dimensão
2065 a 3000 x 1100
2020 a 2955 x 810
194
2065 a 3000 x 1200
2020 a 2955 x 910
194
2065 a 3000 x 1300
2020 a 2955 x 1010
194
2065 a 3000 x 1400
2020 a 2955 x 1110
194
2065 a 3000 x 1500
2020 a 2955 x 1110
294
(Alt. Min. a Alt. Máx. x Larg.)
40
40
78
2020 a 2955 x 1210
294
2065 a 3000 x 1700
2020 a 2955 x 1310
294
2065 a 3000 x 1800
2020 a 2955 x 1310
2065 a 3000 x 1900
2020 a 2955 x 1410
394
9
2065 a 3000 x 2000
2020 a 2955 x 1510
394
2065 a 3000 x 1600
PIVOT
POINT
9
9
(X)
194
(FP) 910
9
27
53
78
394
82
1104
(WD) 1200
31
32
CERTIFICATIONS
Fire resistance according to NF-EN 1634-1:2000 norm | EI230
Essay report nr. RS11-050/A andt RS11-050/B issued by C S T B laboratory
Fireproof classification EI230
Fireproof classification EI260
Accoustic attenuation according to NF EN ISO 140-3 norm
Essay report nr. AC12 issued by CERIBOIS laboratory
Performance of Rw(C;Ctr) = 41 (-3 ;-8) dB
BM TRADA - Burglary resistance according to EN 1627:2011 norm
Test report nr. BMT/MTP/F14266/02 issued by BMTRADA
Classification achieved: Class 3 / Class 3N
BM TRADA - Weathertightness according to BS EN 1026 / BS EN 12207 / BS EN
1027 / BS EN 12208 / BS EN 12211 / BS EN 12210 Norms
Achieved results: AIR – 300Pa (Class 2) • WATER – 200 Pa (Class 5A) • WIND –
1200Pa (Class A3). Issued by BMTRADA
Certification A2P - Doorset - according to the reference «H64»
Burglary resistance certification nº 26.81.64. issued by C N P P laboratory .
Class BP1
Thermal insulation according to NF EN ISO 10077-1 / 10077-2 norm
Thermal calculation Ud issued by CERIBOIS
Performance Up = 1,6 w/(m2*K)
SECURED BY DESIGN - Member Company and Accredited Organization
agreement with ACPO Crime Prevention Iniciatives.
Weathertightness according to NF EN 14351-1 / NF EN 1026 / NF EN 12207 / NF EN
1027 / NF EN 12208 / NF EN 12211 / NF EN 12210 / NF EN 12046-1 / NF EN 13115
Achieved results: AIR - Classe Pmay A*3 • WATER - Classe E*28 • WIND - Classe V*C3
Issued by CERIBOIS Laboratory
33
34
35
ADDRESS | FACTORY | WAREHOUSE
Zona Industrial Ponte da Pedra
Rua da Majoeira | Apartado 47
2416-901 Leiria | PORTUGAL
Telf.+ 351 244 720 610
Fax + 351 244 720 619
[email protected]
BRANCH ALGARVE
Rua da Escola, Arm. 1 e 2, EN125
Patã de Cima
8100-087 Boliqueime
ALGARVE | PORTUGAL
Telf. | Fax + 351 289 543 535
[email protected]
www.portrisa.com
Portrisa reserves itself the right of modifying at anytime, without previous notice,
the characteristics of the products presented in this brochure.
• All the content is PORTRISA’sproperty.
• All rights reserved
BRANCH LISBOA
Quinta São João das Areias
Rua A Lote 92
2685-002 Sacavém | PORTUGAL
Telf. | Fax + 351 219 412 619
[email protected]