docAT2022 Specification Sheet
download 
Denúncia Documentos relacionados
ATM510 - Audio
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Weight
Dimensions
Output connector
Audio-Technica case style
Accessories furnished
ATM610a - Audio
2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive
acoustic pressure produces positive voltage at Pin 2.
CARDIOID CONDENSER BOUNDARY - Audio
†In the interest of standards development, A.T.U.S. offers full details on its test
methods to other industry professionals on request.
*1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
PRO45 Specification Sheet - Audio
Maximum Input Sound Level .................. 134 dB SPL, 1 kHz at 1% T.H.D.
Signal-to-noise Ratio1 .............................. 66 dB, 1 kHz at 1 Pa*
Dynamic Range (Typical) ........................
AT5040 - Audio Technica
To position the AT5040 into the AT8480 shock mount, insert the
microphone directly into the shock mount’s front opening with the AT5040
Audio-Technica logo facing outward and the microphone body ve...
ES933PMC CARDIOID CONDENSER HANGING MICROPHONE
“aimed” between them (Fig. 1). Increasing the height of the mic
above the sources will tend to equalize sound levels between
them, but may also increase pickup of background or reverberant
sound. W...
PRO 49Q, PRO 49QL Specification Sheet - Audio
for phantom power), AT8314 cable (or equal)
should be used. Regardless of cables used, it
is important that both ends of each cable are
wired consistently, with the shield always connected to Pin 1...
AEW-DA660D Manual - Audio
Audio-Technica providência as informações dos seus produtos em diversas linguas na
www.audio-technica.com.
Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le
info...
ATW-DA49 Manual - Audio Technica
Audio-Technica providência as informações dos seus produtos em diversas linguas na
www.audio-technica.com.
Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le
info...
2000 Series - Audio
The band letter reference at the end of 2000 Series Stock Numbers
indicates what band system/component operates in. For simplicity,
model numbers used throughout this manual will reference only the...
