CARDIOID CONDENSER BOUNDARY - Audio
Documentos relacionados
ATM510 - Audio
The microphone shall be 170.0 mm (6.69") long and have a head diameter of 53.7 mm (2.11"). Weight shall be 258 grams (9.1 oz). The microphone shall include a stand clamp and a soft protective pouch...
Leia maisPRO45 Specification Sheet - Audio
The PRO 45 is a wide-range condenser microphone with a cardioid (unidirectional) polar pattern. It was designed for high-quality sound reinforcement and other demanding sound pickup applications. T...
Leia maisATM610a - Audio
Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive acoustic pressure produces positive voltage at Pin 2.
Leia maisAT5040 - Audio Technica
Fixed-charge back plate, permanently polarized condenser Cardioid 20 – 20,000 Hz –25 dB (56.2 mV) re 1V at 1 Pa 50 ohms 142 dB SPL, 1 kHz at 1% T.H.D. 5 dB SPL 137 dB, 1 kHz at Max SPL 89 dB, 1 kHz...
Leia maisAT2022 Specification Sheet
There are 90° and 120° indicators on the bottom side of the microphone pivot. To select 90° (narrow) X/Y operation, rotate each element to align the mark on the pivoting element’s base with the 90°...
Leia maisES933PMC CARDIOID CONDENSER HANGING MICROPHONE
plate power module via a TA3F-type connector. An optional crimping tool and crimp sleeves shall allow for shortening of the cable without loss of RFI immunity. The plate power module shall be desig...
Leia maisPRO 49Q, PRO 49QL Specification Sheet - Audio
directly on the gooseneck area affected. While a modern condenser microphone is not unduly sensitive to the environment, temperature extremes can be harmful. Exposure to high temperatures can resul...
Leia maisAntenna Combiner, 440 to 865 MHz - Audio
The detachable IEC type power input cord supplied is intended for use in regions with mains voltage in the range of 100–125VAC only. Use only the furnished power cord that includes the appropriate ...
Leia mais