docES933PMC CARDIOID CONDENSER HANGING MICROPHONE
download 
Denúncia Documentos relacionados
ATM510 - Audio
The Audio-Technica ATM510 is specified.
Specifications
Element
Polar pattern
Frequency response
Open circuit sensitivity
Impedance
Weight
Dimensions
Output connector
Audio-Technica case style
Acces...
PRO45 Specification Sheet - Audio
the distance to the closest performer. If additional mics are needed for wide sources, they
should not be closer together laterally than
three times the distance to the front source,
to avoid phase...
CARDIOID CONDENSER BOUNDARY - Audio
voltage shall be 7.9 mV at 1 kHz, 1 Pascal. Output shall be low
impedance balanced (200 ohms) from an integral 3-pin XLRM-type
AT2022 Specification Sheet
The microphone includes a 0.5 m (1.6’) cable terminating in a 3-pin
XLRF- type connector and a 3.5 mm (1/8”) TRS connector. The output of
the microphone is a 3-pin XLRM-type connector.
A switch per...
ATM610a - Audio
permits mounting on any microphone stand with 5/8"-27 threads. A soft
protective pouch is also included.
Operation and Maintenance
Output is low impedance (Lo-Z) balanced. The signal appears across...
AT5040 - Audio Technica
ground (shield). Output phase is “Pin 2 hot”— positive acoustic pressure
produces positive voltage at Pin 2.
PRO 49Q, PRO 49QL Specification Sheet - Audio
PRO 49Q ................................................ 13.07" (332.0 mm) long
PRO 49QL ............................................. 16.46" (418.0 mm) long
Both .....................................
