July 10-11, 2012

Transcrição

July 10-11, 2012
5th Latin American CFD Workshop Applied to the Oil and Gas Industry
July 10-11, 2012
Windsor Florida Hotel - Rio de Janeiro - Brazil
Complete Program
Organization
Support
Sponsors
Agência Nacional
do Petróleo,
Gás Natural e Biocombustíveis
prh
Programa de
Recursos Humanos
da ANP
uu July 10
8:00
Registration Open
9:00
Pre-Salt Development: Challenges and Oportunities
Orlando Ribeiro - Petrobras - Cenpes
9:40
Sweep Over All Operative Conditions of a Light Oil Pipeline (Line 3). Results From CFX Coupled With a Thermophysical Model
Luis Fernando López-Cisneros - PEMEX - PEP
10:20
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
11:00
Applied R&D Solutions for Oil & Gas Custom Demands
Carlos Eduardo Fontes - ESSS
11:30
CFD Opportunities and Challenges in the Oil & Gas Industry
Samir Khanna - BP
12:10
Room
LUNCH
GUANABARA
PLAZA
14:10
CFD as a Tool of Research, Development and Virtual Prototyping The Experience of Biomass Gasification Research in CENPES
Marco Antonio Haikal - Petrobras - Cenpes
Dispersed Multiphase Flow Modeling Using Lagrangian Methods
Markus Braun - ANSYS, Inc.
14:40
Design of a Gun Barrel Tank for Heavy Oil-Water Segregation
Luis Fernando López-Cisneros - PEMEX - PEP
The Development of Efficient Compact Separation Technology using CFD
Bart Lammers - ASCOM Separation
15:00
Particle-based Simulation of Oil-water Multiphase Separation
Process
Alan Junji Yamaguchi - USP
Simulation of Water-in-Oil Emulsion Flow with OpenFOAM using
Validated Coalescence and Breakage Models
Paulo Laranjeira da Cunha Lage - UFRJ
15:20
Deploying Nanotechnology in Oil and Gas Operations: Pore-Scale
Modelling of Nanoparticle Adsorption-Desorption Behavior
Harvey Thompson - University of Leeds
Modelling and Experimental Databases on Poly-Dispersed Bubbly
Flows
Dirk Lucas - HZDR
15:40
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
16:20
Application of Computational Fluid Dynamics in the Evaluation of
Thermal and Fluid Flow Patterns of Refinery Furnaces
Ricardo Serfaty - Petrobras - Cenpes
Compositional Thermo-Physical Model and Rheological
Characterization of Heavy Oils Coupled With ANSYS CFX
Adrián González-Villanueva - Grupo SSC
16:50
Optimization of Ejector’s Performance With a CFD Analysis
Amanda Mattos - UFRJ
CFD Simulation of an Industrial Riser with Different Feedstock
Compositions
Ariane Corrêa Barbosa - Unicamp
17:10
CFD Simulation for Comparison of Two L-Valve Sets
Marcelo Ricardo Queiroz Medeiros - Petrobras - Cenpes
Study & Application of Transient Characteristic of Fluid Phenomena
for Downhole (Oil & Gas) Pulsating Devices Using FLUENT ANSYS
Bharat Pawar - Halliburton
17:30
Experimental and Computational Study of a Water Wash Spray
Injection
Rudi Schick - Spraying Systems
Catalyst Residence Time Prediction for FCC Riser Using a CFD Tracer
Technique
Helver Crispiniano Alvarez Castro - Unicamp
17:50
Fluid-Dynamic Analysis of a Natural Gas Reformer Furnace
Ignacio Garnero - INVAP S.E.
WELLRES 1.0: Reservoir and Well Coupling Simulation Software
António Fabio Carvalho da Silva - SINMEC/UFSC
18:10
CLOSING SESSION
CLOSING SESSION
18:30
WELCOME COCKTAIL
20:00
end of 1st day
Plenary Session
Technical Keynote Speakers
Technical Session
5th Latin American CFD Workshop Applied to the Oil and Gas Industry
uu July 11
8:00
Registration Open
9:00
Opportunities and Challenges to Maximize Local Content in Brazil
Raimar van den Bylaardt - IBP
9:40
Oil Wells Flow Analysis Based on CFD Simulations
Paulo Dore Fernandes - Petrobras - Cenpes
10:20
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
11:00
Robust Design with CFD Technology - Case Studies
Ahmad Haidari - ANSYS, Inc.
11:30
Petrobras Refining Challenges
Washington Geraldelli - Petrobras - Cenpes
12:10
Room
LUNCH
GUANABARA
PLAZA
14:10
CFD Simulations in the Ocean Engineering Department
Paulo R. Pagot - Petrobras - Cenpes
Experimental Studies and Combustion Modelling Applied to
Turbulent Flow
Luis Fernando F. da Silva - PUC-RJ
14:40
Numerical Solution of a Detached Flow Over a Bluff Body Using the
SAS Scaling Resolving Simulation Model
Clovis R. Maliska - SINMEC/UFSC
Study of Hot Air Recirculation Around Off-Road TIER4 Diesel Engine
Unit Using CFD
Siddharth Jain - Halliburton
15:00
Evaluation of Drag Coefficient on Riser Floaters using CFD
Érico Almeida Santos - Petrobras - Cenpes
Modified Porosity Distributed Resistance Combined to Flamelet
Combustion Model for Numerical Explosion Modelling
Sávio Vianna - Unicamp
15:20
Coupling of Cable FEA Solution With 6 DOF CFD Solution for Subsea
Equipment Launching Simulation
Fabio Saltara - ESSS
Large Eddy Simulation of Gas – Solid Fluidized Bed
German Gonzalez Silva - Unicamp
15:40
REFRESHMENTS IN EXHIBITION AREA / POSTER SESSION
16:20
CFD Study of Oil Spill in Shallow Waters
Madhusuden Agrawal - ANSYS, Inc.
Technological Challenges and Solutions for Well Construction in
Pre-Salt Fields
Rosana Lomba - Petrobras - Cenpes
16:50
Development and Validation of a Morphology Detection Algorithm
(AIAD) for Horizontal Two Phase Flows
Thomas Hoehne - HZDR
Numerical Simulation of Acidizing in Carbonate Reservoirs
Andressa Ribeiro de Melo - ESSS
17:10
Numerical Study of the Dynamic Flow Behavior in a Laboratory Scale
Bubble Column Operating Under Homogeneous and Heterogeneous
Regime
Renato Soccol Junior - FURB
Well Reservoir Simulation Considering Horizontal Wells Equipped
With Unevenly Perforated Screens
Paulo Dore Fernandes - Petrobras - Cenpes
17:30
Numerical Simulation of the Water-Oil Flow in a Sandstone Sample
Marcio Michiharu - USP
Evaluation the Effect of Tank Temperature on Transport of RAT
(Atmospheric Distillation Residue) for the Potiguar Refinery Clara
Camarão (RPCC)
Gildson Bastos Felix - Chemtech
17:50
Computational Fluid Dynamics Analysis of a Three Phase Separator
to Re-Engineering of Internals in Order to Improve the Efficiency and
Performance of the Vessel Separator
Ruben Ramirez Jaimez - HNA Ingeniería
Simulation of Transient Pressure Behavior for a Well With a FiniteConductivity Vertical Fracture
Thiago Judson Lima Oliveira - Petrobras - Cenpes
18:10
CLOSING SESSION
CLOSING SESSION
18:30
end of 2nd day
Plenary Session
Technical Keynote Speakers
Technical Session
POSTER SESSION
uu July 10
•
Gas Dispersion Jet Simulation: The First Step to
Application of CFD in Area Classification Projects
Victor Kanehiro Arume de Souza - ESSS
•
Numerical Simulation and Experimental Investigation of
Gas-Solid Multiphase Flows
Jonathan Utzig - FURB
•
OPTIMI - A 3D Computational Tool for Gas Detector
Optimization Analysis and Boolean Integer Programming
Sávio Vianna - Unicamp
•
Vortex Induced Vibration Simulation in a TwoDimensional Free-Oscillating Cylinder
Vinicius Girardi Silva - ESSS
•
Fracture and Fluid-Structure Interaction Simulation by
Moving Particle Semi-Implicit (MPS) Method
Rubens Augusto Amaro Junior - USP
•
•
RSM-SSG Model Applied to a Coaxial Confined Jet Flow
Lizoel Buss - FURB
Performance Evaluation of an Algebraic Multigrid
Method Applied to Reservoir Simulation Problems Using
Polyhedral Grids
Ederson Augusto Grein - SINMEC/UFSC
•
•
Subgrid Turbulence Model Applied to a Gas-Particle Flow
in a Cyclone Separator
Diego Alves de Moro Martins - UFU
High Pressure Jet Modeling Comparison Using
Compressible and Incompressible Solvers
Vitor Maciel Vilela Ferreira - Chemtech
•
SCBR Model as a Decision Support System Tool for
Management of Biofuels Contaminated Sites
Ana Claudia Schneider - UFSC
•
Compositional Thermo-Physical Model Coupled With
ANSYS CFX, CFD Analysis of an Oil Pipeline With a Three
Phase Flow
Adrián González-Villanueva - Grupo SSC
•
Simulation of Water Ballast Exchange – A Case Study
Flávio da Silva Francisco - UFRJ
•
Simulation of Coke Combustion in a Riser Type FCC
Regenerator Using CFD
Gustavo Fabiano Gonçalves - Unicamp
•
Numerical Modeling of Annular Two-Phase Flows in
Vertical Ducts
Emilio E. Paladino - SINMEC/UFSC
•
Vortex Induced Vibration Analysis in Rigid Jumper Using
2 Way FSI
Patrick Farias - FMC TECHNOLOGIES
•
Numerical Simulation of Hydrodynamic Forces at Circular
Cylinders Due to Steady and Oscillating Currents
George Parayil Tharakan III - UFF
•
Gas Dispersion Studies for Catalytic Reforming Unit
Isabella Zonno - SAFETYENG
•
Optimization of Cyclones by Combination of Nonlinear
Inequality Constrained Problem and Computational Fluid
Dynamics Techniques (CFD)
Oscar Lino Sgrott Júnior - FURB
uu July 11
•
Numerical Simulation of Multiphase Flow at a FlowlineRiser
Rodrigo Peralta Muniz Moreira - ESSS
•
Study of Transient Gas Backflow in a Dead Leg Line of a
Subsea System, Induced by Closing Valve in a Multiphase
Line
Thamires Anelieze Leal Guedes - Petrobras
•
•
Compositional Thermo-Physical Model Coupled With
ANSYS CFX, CFD Analysis of a Three Phase Separator
Processing a Retrograde Fluid
Adrián González-Villanueva - Grupo SSC
Validating Polydispersed Multiphase Flow Simulations
Using ANSYS CFX: Bubble Plumes
Paulo Laranjeira da Cunha Lage - UFRJ